HOME  /  E-SHOP

BUY LAMBDA LAB PERISTALTIC PUMPS ONLINE

COST OF LABORATORY PERISTALTIC PUMPS AND ACCESSORIES
Guide to buy the peristaltic pump and its accessories:

 

  • Choose the pump based on the desired flow rate. The pump position (Art. No.: 4801, 4901, 5001, 6001, 6002*) includes peristaltic pump, 
    universal power supply
     (plug type: EU, UK, US or AUS) and free silicone tubing 5m (tubing size: 0.5/2.5 mm, 1/3 mm, 2/4 mm, 3/5 mm or 4/6 mm).
    * silicone tubing or others with similar elasticity (internal diameter 2 to 12 mm, wall thickness ~2 mm)
     

  • Remote control of the peristaltic pump with an external signal:

    • Pump remote control (analog and digital) cable (8 poles with one open end) (Art. No. 4810-o) to control almost everything remotely in the peristaltic pump

    • Pump ON/OFF remote control cable (2 poles, open end) (Art. No. 4802​) to remotely switch ON/OFF the peristaltic pump
       

  • Foot-switch:

    • Standard (Art. No. 4823) - Pressing the foot-switch would switch ON & releasing the foot-switch would switch OFF the peristaltic pump

    • Bistable switch (Art. No. 4823-b) - Pressing the foot-switch would switch ON & pressing it again would switch OFF the peristaltic pump
       

  • PNet, PC proocess control software for peristaltic pumps (Art. No. 6600)
     

  • For PC communication, LAMBDA PNet software or third party software:

    • RS-485 interface (Art. No. 4816) and RS-485 connection kit for connection to a serial port or USB port (Art. No. 4817-kit). RS-485 is highly recommended as it allows communication with up to 99 instruments from one single port (COM port)
      or

    • RS-232 interface (Art. No. 4822) and RS-232 connection cable (Art. No. 4819-232)
       

  • Pump-flow INTEGRATOR (Art. No. 4803) for electronic recording of the transferred quantity of liquid as a function of time (accessible only by the RS-communication)